UltraCrete Cattle Slats
UltraCrete manufacture a range of Cattle Slats suitable for both beef and dairy cattle. Slats can aid hoof health by allowing slurry to drop quickly into the tank below, keeping the animals feet drier, reducing the environment which supports bacteria linked to lameness conditions such as digital dermatitis and slurry heel.
Types of Cattle Slats
Cattle slats Big - T
Big T cattle slats are common in farm cattle sheds, they are 1.2 meter wide and are manufacture to order. We make 200 mm deep Maxi slats and are designed for either cattle or tractor load bearing and can be manufactured to your required length up to 13 feet 6 inches long. We offer notched end Big T slats to be compatible with our Maxi slat at 178 mm deep. Our slats are designed for your required load bearing by a team of qualified designers.
| SLATE TYPE | LOADING | LENGTH | WIDTH | HIEIGHT |
|---|---|---|---|---|
|
Big - T |
Cattle |
4 - 2.4 m |
1.2 m |
0.2 m |
|
Big - T |
4T Tractor |
4 - 2.4 m |
1.2 m |
0.2 m |
|
Big - T |
6T Tractor |
4 - 2.4 m |
1.2 m |
0.2 m |
|
Big - T |
10T Tractor |
4 - 2.4 m |
1.2 m |
0.2 m |
Design Features
- Cattle loading too 12ft long
- Tractor loading too 13.6 feet long
- Mechanical installation required
- 200 mm thick or Notched end to 178 mm thick
- Reinforced design to meet BS 1234
- Manufactured to customers specific length
Uses for Big T slats
- New farm tanks with big spans
- Heavier tractor loadings
- RL slats for use with feeder wagons
- N/E to match our maxi slat depth
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request
Cattle slats Diagonal
Big T cattle slats are common in farm cattle sheds, they are 1.2 meter wide and are manufacture to order. We make 200 mm deep Maxi slats and are designed for either cattle or tractor load bearing and can be manufactured to your required length up to 13 feet 6 inches long. We offer notched end Big T slats to be compatible with our Maxi slat at 178 mm deep. Our slats are designed for your required load bearing by a team of qualified designers.
| SLATE TYPE | LOADING | LENGTH | WIDTH | HIEIGHT |
|---|---|---|---|---|
|
Diagonal |
4/6 tonne |
3000mm |
1200mm |
178mm |
|
Diagonal |
4/6 tonne |
3000mm |
1200mm |
178mm |
Design Features
- Allows slurry to fall through the slots better if being scraped in either direction
- Mechanical installation required
- 178 mm thick
- Designed to current BS EN standard
- Manufactured to 3 or 3.3 m length
Uses for Big T slats
- New farm tanks with big spans
- Heavier tractor loadings
- RL slats for use with feeder wagons
- N/E to match our maxi slat depth
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request
Cattle Slats Single
Single cattle slats for new build and replacements, they can be easily positioned and laid in by hand. They are designed for cattle loading up to 3660mm, 12 feet, or tractor loading to 3050mm 10 feet.
| SLATE TYPE | LOADING | LENGTH | WIDTH | HIEIGHT |
|---|---|---|---|---|
|
Single |
4T Tractor |
1.8 - 3.35 m |
0.23 m |
0.178 m |
|
Single |
4T Tractor |
1.8 - 3.35 m |
0.23 m |
0.178 m |
Design Features
- Cattle loading to 3660mm 12ft
- Tractor loading 3050mm 10ft
- Able to be positioned by 2 men
- 178 mm deep. 150mm wide. club end 230mm.
- Manufactured in batches of 5 no.
- Design to meet BS EN12737:2004
- Manufactured to customers specific lengths.
Uses for Big T slats
- Inaccessible sheds for tractors
- New builds or replacements
- Infill unit in an odd length of tank
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request
Cattle slats Doubles
Double cattle slats manufactured mostly for replacements. Manufactured 200 mm deep and designed for cattle loading or tractor loading to your required length up to 3660mm(12ft) long. Notched ends manufactured to match maxi slat depth of 178 mm. Slats designed to your length and load bearing requirements.
| SLATE TYPE | LOADING | LENGTH | WIDTH | HIEIGHT |
|---|---|---|---|---|
|
Double |
4 Tonne |
1.8 - 3.66 m |
0.33 m |
0.2 m |
|
Double |
Cattle |
1.8 - 3.66 m |
0.33 m |
0.2 m |
|
Double |
4T Tractor |
1.8 - 3.66 m |
0.33 m |
0.178 m |
|
Double |
Cattle |
1.8 - 3.66 m |
0.33 m |
0.178 m |
Design Features
- Cattle loading to 3660mm (12ft) long
- Tractor loading to 3660mm (12ft) long
- Mechanical installation required
- 200 mm thick or Notched end to 178 mm thick
- Designed to current BS EN standard
- Manufactured to customers specific length
Uses for Big T slats
- Farm sheds replacements, new build
- Infill unit in an odd length of tank
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request
Cattle Slats Treble
Treble cattle slats are mostly for replacements but can also be used in new builds, 333mm wide and 200 mm deep, slats are designed for either cattle or tractor load bearing and can be manufactured to your required length up to 3660mm (12ft) long. Notched ends compatible with Maxi slat 178 mm available.
| SLATE TYPE | LOADING | LENGTH | WIDTH | HIEIGHT |
|---|---|---|---|---|
|
Treble |
6T Tractor |
1.8 - 3.66 m |
0.5 m |
0.2 m |
|
Treble |
6T Tractor |
1.8 - 3.66 m |
0.5 m |
0.2 m |
|
Treble N/E |
4T Tractor |
1.8 - 3.66 m |
0.5 m |
0.178 m |
|
Treble N/E |
Cattle |
1.8 - 3.66 m |
0.5 m |
0.178 m |
Design Features
- Cattle loading to 3660mm (12ft) long
- Tractor loading to 3660mm (12ft) long
- Mechanical installation required
- 200 mm thick or Notched end to 178 mm thick
- Designed to current BS EN standard
- Manufactured to customers specific length
Uses for Big T slats
- Existing farm shed replacements
- Also used in new builds
- Infill unit in an odd length of tank
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request
Cattle slats Hatch Panels
Slatted hatch panels are designed to allow access to the slurry pit for a pump, the hole is 750 mm square and comes with a galvanised lid. Slat hatches are 200 mm deep for the Big T range up to 4000mm long or 178 mm notched end to match our Maxi range up to 3660mm (12ft) long. Solid slabs are available with similar hole.
| SLATE TYPE | LOADING | LENGTH | WIDTH | HIEIGHT |
|---|---|---|---|---|
|
Hatch Panel |
6T Tractor |
2.4 - 4 m |
1.2 m |
0.178 m |
|
Hatch Panel |
6T Tractor |
2.4 - 4 m |
1.2 m |
0.178 m |
Design Features
- Large access hole for slurry pump 750 x750mm
- Mechanical installation required
- 200 mm thick Notched end for use with Maxi slats
- Designed to current BS EN standard
- Manufactured to customers required length
- Galvanised steel cover
- Solid slab version available
Uses for Big T slats
- Access for slurry pumps and pipes
- Notched end for use with Maxi slats
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request
Cattle Slats Maxi
Maxi cattle slats are designed for farm cattle sheds where spans are less than 3000 mm, they are 1200 mm wide and 178 mm deep. Manufactured for a cattle loading slat, up to 3660mm (12ft) long, and tractor loading up to 3355 mm (11ft) long.
| SLATE TYPE | LOADING | LENGTH | WIDTH | HIEIGHT |
|---|---|---|---|---|
|
Maxi |
4T Tractor |
2.4 - 3.66 m |
1.2 m |
0.178 m |
|
Maxi |
Cattle |
2.4 - 3.66 m |
1.2 m |
0.178 m |
Design Features
- Cattle loading to 3660mm (12ft) long
- Tractor loading to 3355mm (11ft) long
- Mechanical installation required
- 178 mm thick
- Designed to current BS EN standard
- Manufactured to customers specific length
Uses for Big T slats
- Ideal for tanks with shorter spans
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request
Cattle Slats Transverse
Transverse cattle slats are used where the slat is spanning across the width. They are commonly used on slurry channels. Slats are designed for your required load bearing and length requirements.
| SLATE TYPE | LOADING | LENGTH | WIDTH | HIEIGHT |
|---|---|---|---|---|
|
Transverse |
6T Tractor |
2.4 - 3.66 m |
1.2 m |
0.178 m |
|
Transverse |
10T Tractor |
2.4 - 3.66 m |
1.2 m |
0.178 m |
Design Features
- Allows heavy weight to cross the slats
- Mechanical installation required
- 178 mm or 200mm thick
- Design to current BS EN standard
- Manufactured to customers required length
Uses for Big T slats
- On slurry channels where heavy weights cross them
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request