WALL PANELS

UltraCrete Wall Panels

UltraCrete manufacture a range of  Wall Panels for Agricultural uses.

Types of Wall Panels

  • Silo/Grain
  • A-Wall
  • Sol-Wall Blocks
  • L-Wall
  • Stock Wall

Wall Panel - Silo/Grain

Silo wall panels are designed to allow construction of silo or grain stores. These can be designed in
multiple heights to suit your project.

Design Features

  • 135 mm thick panels as standard, 150 mm can be made to requirements
  • 1000 mm, 1200 mm & 1500 mm high panels
  • Stock lengths 4572 mm, 6000 mm, 6096 mm
  • Can be made any length up to 20ft to suit bespoke orders
  • Male / Female locking system to allow neat joints
  • Designed to current BS EN standard
  • Double loaded vertical panels for central dividing walls, can be installed vertically but requires foot foundation.
  • Simple clamp plate and bolt fixing system, sockets designed and tested
  • Incorporated lifting socket for installation with a designed and tested bracket available for an additional cost
  • Mastic sealant material supplied for joints
  • Larger thickness timbers to allow forklift pick up without chipping of edges

Uses for Big T slats

  • Silo clamps or grain store walls
  • Double loaded panels for dividing walls where loads are on both sides
  • Upright installation for central dividing walls, cradles for
  • Installation can be supplied
Tank Size Length Width
1 100 ft X 10 ft
30.480 m
3.048 m
2 100 ft X 10 ft
30.480 m
6.096 m
3 100 ft X 10 ft
45.75 m
3.048 m
4 100 ft X 10 ft
45.75 m
6.096 m
5 100 ft X 10 ft
61.00 m
4.000 m

Design & Quality Assurance provisions

  • Design certificates available for your building warrants
  • Concrete design certificates supplied
  • Concrete strength cube reports available upon request

Wall Panel - A-Wall

A-walls are designed to interlock together and can fix to the ground. They are 3050mm (10ft) high and 1000mm long, with cast in sockets to aid installation.

Design Features

  • Free standing and can be fixed down
  • Easy to move with a forklift
  • 3050mm high and 1000mm long segments
  • Male / Female locking system to allow neat joints
  • Designed to current BS EN standard
  • Mastic sealant material supplied for joints
  • Can retain loads on either side

Uses for Big T slats

  • Temporary bay dividers, eg grain stores
  • Permanent wall where they are fixed to the ground
  • Quick to move or setup a dividing wall

Design & Quality Assurance provisions

  • Design certificates available for your building warrants
  • Concrete design certificates supplied
  • Concrete strength cube reports available upon request

Wall Panels – Free Standing Sol-Wall Blocks

We have free standing dividing wall blocks which lock together and can be used for bay dividers. They can form bays or be a dividing wall, easily erected and moved.

Design Features

  • Free standing and lock together
  • Quick to move and setup
  • 0.5 meter high and in 06, 1.2 or 1.8 meter segment
  • Lifting points protected in the wall
  • Designed to current BS EN standard
  • Mastic sealant material supplied for joints

Uses for Big T slats

  • Movable dividing walls for bays
  • Form bays with the interlocking joints on turning corners.
  • Free standing and form wall heights in multiple of 0.5 meters

Design & Quality Assurance provisions

  • Design certificates available for your building warrants
  • Supplied with certified lifting loops
  • Concrete design certificates supplied
  • Concrete strength cube reports available upon request

Wall Panels – L-Wall

L walls are designed to be free standing. Walls manufactured 1000mm or 2000mm long and height up to 3000mm. Heights available to your requirements. Cast in lifting points to help erection.

Design Features

  • Free standing or can be fixed down
  • Easy to move with a forklift
  • 3000mm high and 1m or 2 m lengths
  • Floor can be laid over the toe to increase stability
  • Designed to current BS EN standard
  • Mastic sealant material supplied for joints

Uses for Big T slats

  • Permanent wall for a silo pit or grain store
  • Movable wall for a temporary bay
  • Quick to set up

Design & Quality Assurance provisions

  • Design certificates available for your building warrants
  • Concrete design certificates supplied
  • Concrete strength cube reports available upon request

Wall Panels - Stock Wall

Stock wall panels are designed to allow construction of walls for cattle, fodder and machinery sheds. These can be designed in multiple heights to suit your project.

Design Features

  • 100 mm thick panels
  • 1000 mm, 1200 mm & 1500 mm high panels
  • Stock lengths 4572 mm, 6000 mm, 6096 mm
  • Can be made any length up to 20ft to suit bespoke orders
  • Male / Female locking system to allow neat joints
  • Designed to current BS EN standard
  • Simple clamp plate and bolt fixing system, sockets designed and tested
  • Incorporated lifting socket for installation with a designed and tested bracket available for an additional cost
  • Mastic sealant material supplied for joints
  • Larger thickness timbers to allow forklift pick up without chipping of edges
  • Chipping of edges

Uses for Big T slats

  • Silo clamps or grain store walls
  • Cattle sheds, Fodder sheds or Machinery sheds
  • 500 - 600 mm high panels can be used for cattle feeding
  • Passage walls with metal feed passage units
LENGTH WIDTH THICKNESS
6096 mm
1000, 1200 & 1500 mm
100 mm
6000 mm
1000, 1200 & 1500 mm
100 mm
4572 mm
1000, 1200 & 1500 mm
100 mm
Length made to your requirement
1000, 1200 & 1500 mm
100 mm

Design & Quality Assurance provisions

  • Design certificates available for your building warrants
  • Concrete design certificates supplied
  • Concrete strength cube reports available upon request