Wall Panel - Silo/Grain
Silo wall panels are designed to allow construction of silo or grain stores. These can be designed in
multiple heights to suit your project.
Design Features
- 135 mm thick panels as standard, 150 mm can be made to requirements
- 1000 mm, 1200 mm & 1500 mm high panels
- Stock lengths 4572 mm, 6000 mm, 6096 mm
- Can be made any length up to 20ft to suit bespoke orders
- Male / Female locking system to allow neat joints
- Designed to current BS EN standard
- Double loaded vertical panels for central dividing walls, can be installed vertically but requires foot foundation.
- Simple clamp plate and bolt fixing system, sockets designed and tested
- Incorporated lifting socket for installation with a designed and tested bracket available for an additional cost
- Mastic sealant material supplied for joints
- Larger thickness timbers to allow forklift pick up without chipping of edges
Uses for Big T slats
- Silo clamps or grain store walls
- Double loaded panels for dividing walls where loads are on both sides
- Upright installation for central dividing walls, cradles for
- Installation can be supplied
| Tank Size | Length | Width |
|---|---|---|
|
1 100 ft X 10 ft |
30.480 m |
3.048 m |
|
2 100 ft X 10 ft |
30.480 m |
6.096 m |
|
3 100 ft X 10 ft |
45.75 m |
3.048 m |
|
4 100 ft X 10 ft |
45.75 m |
6.096 m |
|
5 100 ft X 10 ft |
61.00 m |
4.000 m |
Design & Quality Assurance provisions
- Design certificates available for your building warrants
- Concrete design certificates supplied
- Concrete strength cube reports available upon request